Riverstone-networks WICT1-12 Manual de usuario descargar pdf (Pagina 104)

100

101

6-4 Riverstone Networks RS Switch Router User Guide Release 8.0

SmartTRUNK Example Configuration SmartTRUNK Configuration Guide

The following is the configuration for the Cisco 7500 router:

The following is the configuration for the Cisco Catalyst 5000 switch:

The following is the SmartTRUNK configuration for the RS labeled ‘R1’ in the diagram:

The following is the SmartTRUNK configuration for the RS labeled ‘R3’ in the diagram:

The following is the SmartTRUNK configuration for the RS labeled ‘R2’ in the diagram:

Note

Notice in the example above that because R1 and R2 are operating only as

switches (layer-2 traffic only), their SmartTRUNKs were not assigned to

interfaces.

interface port-channel 1

ip address 10.1.1.1 255.255.255.0

ip route-cache distributed

interface fasteth 0/0

no ip address

channel-group 1

set port channel 3/1-2 on

smarttrunk create st.1 protocol no-protocol

smarttrunk create st.2 protocol huntgroup

smarttrunk create st.3 protocol huntgroup

smarttrunk add ports et.1(1-2) to st.1

smarttrunk add ports et.2(1-2) to st.2

smarttrunk add ports et.3(1-2) to st.3

interface create ip to-cisco address-netmask 10.1.1.2/24 port st.1

interface create ip to-s1 address-netmask 11.1.1.2/24 port st.2

interface create ip to-s2 address-netmask 12.1.1.2/24 port st.3

smarttrunk create st.2 protocol huntgroup

smarttrunk create st.4 protocol no-protocol

smarttrunk add ports et.1(1-2) to st.2

smarttrunk add ports et.2(1-2) to st.4

smarttrunk create st.3 protocol huntgroup

smarttrunk create st.5 protocol no-protocol

smarttrunk add ports et.1(1-2) to st.3

smarttrunk add ports et.2(1-2) to st.5

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 717 718

Comentarios a estos manuales

Sin comentarios

Riverstone-networks WICT1-12 Manual de usuario Pagina 104

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Riverstone-networks WICT1-12