Riverstone Networks WICT1-12 Especificaciones Pagina 101

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 100
Riverstone Networks RS 32000 Switch Router Getting Started Guide 5-9
Managing Software Hitless Software Upgrade
Here is an example:
6. Configure the BootP/TFTP server with the RS 32000’s CPU MAC address, an appropriate IP
address, and the location of the RS 32000 software image file. Additionally, make sure that the ARP
cache of the BootP/TFTP server is set correctly for the RS 32000.
7. Reboot the RS 32000 by entering the reboot command at the Boot prompt.
Here is an example:
5.4 HITLESS SOFTWARE UPGRADE
The operating software for RS 32000 switch routers equipped with redundant Control Modules (CMs) can be upgraded
without having to reboot the system. This ability to update the software without rebooting the RS is known as a
hitless” upgrade, referencing the fact that all flows and routes are maintained throughout the upgrade process.
Note OC-12 and all Smartcards in general are reset when performing a hitless upgrade
if there is a change to the code for these specific line cards (checksum has
changed).
The basic process of performing a hitless upgrade is outlined below:
New software is placed on a reachable TFTP server
Software is downloaded to the backup CM
rs-boot> set autoboot bootp
rs-boot> reboot
Ethernet Base address = 00:00:1d:12:34:56
Ethernet CPU address = 00:00:1d:12:34:57
Performing Bootp with timeout in 5 seconds.
** plen = 300 plen - sizeof(struct bootp) = 0
BOOTPD='134.141.179.134'
netaddr='134.141.179.132'
* bootp source is C:\TFTPBOOT\ROS80
Booting boot file C:\TFTPBOOT\ROS80.
source: tftp://134.141.179.134/C:\TFTPBOOT\ROS80
File: version (703 bytes)
Build location: host 'matrix' by 'adm'
Version: 8.0.0.0
Build date: Mon Dec 25 23:56:47 2000
File: kernel (3568593 bytes)
Loading kernel (base 0x80001000, size 50528)
(base 0x8000d560, size 3507312)
100% - kernel loaded...
...
...
Press RETURN to activate console . . .
Vista de pagina 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 110 111

Comentarios a estos manuales

Sin comentarios