Riverstone Networks WICT1-12 Especificaciones descargar pdf (Pagina 99)

Riverstone Networks RS 32000 Switch Router Getting Started Guide 5-7

Managing Software Loading Software from the Network

• Subnet mask for the RS 32000 – (netmask)

• The IP address of the RS 32000’s default gateway – (gateway)

• Full path and filename to the software image on the TFTP server – (bootsource)

• IP address of the TFTP server – (bootaddr)

Here is an example:

6. Enter the set command to view the changes.

Here is an example:

7. From the Boot prompt, use the ping command to verify that the RS 32000 can reach the TFTP

server.

8. Reboot the RS 32000. As the RS 32000 initializes, it ignores the software image on the PC card and

retrieves its operating software from the TFTP server at

134.152.176.5.

rs-boot> set netaddr <IPaddr>

rs-boot> set netmask <subnet-mask>

rs-boot> set gateway <IPaddr>

rs-boot> set bootsource <dir-filename>

rs-root> set bootaddr <IPaddr>

rs-boot> set netaddr 134.152.179.132

rs-boot> set netmask 255.255.255.224

rs-boot> set gateway 134.152.179.129

rs-boot> set bootsource /tftpboot/ros80

rs-boot> set bootaddr 134.152.176.5

rs-boot> set

...

netaddr = 134.152.179.132

autoboot = boot

netmask = 255.255.255.224

gateway = 134.152.179.129

bootsource = /tftpboot/ros80

bootaddr = 134.152.176.5

ethaddr = 00:00:1d:12:34:56

(ethaddr is base MAC addr, add one for actual CPU MAC address)

sysid = -1

rs-boot>

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 110 111

Sin comentarios

Riverstone Networks WICT1-12 Especificaciones Pagina 99